Technical Specification - VBOX 3iS Single Antenna (v1)
Updated on Mar 13, 2026
GNSS Specifications
Velocity
Accuracy
0.1 km/h (averaged over 4 samples)
Update rate
100 Hz
Maximum velocity
655 kts (1200 km/h)
Minimum velocity
0.1 km/h
Resolution
0.01 kts (0.0185 km/h)
Latency
20 ms (fixed)
Absolute Positioning
Accuracy
3 m (95 % CEP*)
Accuracy with SBAS DGPS
<1.8 m (95 % CEP*)
Accuracy with RTCM DGNSS Base Station
40 cm (95 % CEP*)
Update rate
100 Hz
Height accuracy
6 m (95% CEP*)
Height accuracy with DGNSS
2 m (95% CEP*)
Distance
Accuracy
0.05% (>50 cm per km)
Update rate
100 Hz
Resolution
0.078 mm
Acceleration
Accuracy
0.5 %
Maximum
20 g
Resolution
0.01 g
Update rate
100 Hz
Heading
Resolution
0.01°
Update rate
100 Hz
Time
Resolution
0.01 s
Accuracy
30 ns
Brake Stop Accuracy (Trigger activated)
Accuracy
±1.8 cm**
Definitions
* Circle of Error Probable (CEP): 95 % of the time the position readings will fall within a circle of the stated diameter
** Based on <50 m brake stop distance
IMU Specifications
Gyroscopes (Angular rate sensors)
Accelerometers
Dynamic range
±450°/s
±20 g
Nonlinearity
0.01 % of full scale
0.1 % of full scale
Resolution
16 bit ADC (0.014°/s)
16 bit ADC (0.15 mg)
Bandwidth
50 Hz
50 Hz
Noise density
0.01°/s/√Hz
60 μg/√Hz
Bias stability
0.003°/s
15 μg
Bias repeatability (1 year)
0.2°/s
0.005 g
Outputs
CAN Output
Output data rate
125 kbit/s, 250 kbit/s, 500 kbit/s and 1 Mbit/s selectable baud rate. Software controlled CAN termination.
Data available
Outputs:Satellite count, time, position, speed, heading, body heading, height, vertical velocity, longitudinal acceleration, lateral acceleration, distance, IMU heading* , IMU roll angle* , IMU pitch angle* , X acceleration, Y acceleration, Z acceleration, pitch rate, roll rate, yaw rate, Robot heading *with IMU enabled.*with IMU enabledResults:Trigger event time, trigger speed, start speed, end speed, deceleration test time, lap time, split time, radius of turn.
RS232 Output
Output data rate
Up to 100 Hz
Digital Output
Signal levels
Low = 0 V, High = 5 V, Max. frequency 4.4 kHz
Output type
Speed, 1 PPS or Lap Beacon
GNSS Antenna Supply
Supply voltage
5 V DC
Inputs
Input Power
Input voltage range
6.5 – 30 V DC
Power
7.5 W (maximum)
Digital Input
Input function
Brake event trigger/ track marker
Environmental and physical
Weight
480 g (approximate)
Size
133.2 mm x 98 mm x 37.5 mm
Operating temperature
-20°C to +70°C
Storage temperature
-40°C to +85°C
IP rating
IP67
We use cookies to ensure the Support Centre functions correctly and to understand how it is used so we can improve it.
We use analytics tools, including Google Analytics, which require your consent.
You can accept or reject analytics cookies. Essential cookies are always enabled.